LT300 by Extech - Light Meter

Area Monitoring
Light Meter Manufacturer: Extech
LT300 by Extech - Light Meter
LT300 by Extech - Light Meter
LT300 by Extech - Light Meter

Note: This unit is calibrated every 2 years. NIST calibration is valid for 1 year. Contact RAECO Rents to confirm availability if required.

The Extech LT300 is a digital light meter with a measurement range of 1 to 200,000 Lux (0.1 to 20,000 Foot-candles), using a detachable CIE photopic-response photo sensor on a 12 in. coiled cable (expandable to 24 in.). Built-in functions include Max/Min recording, Peak Hold (captures pulses as fast as 10 µs), Data Hold, and Relative mode for differential comparisons. Large backlit LCD with bargraph display. Suitable for OSHA lighting compliance checks, illumination audits, and energy efficiency assessments in offices, factories, hospitals, cleanrooms, and schools.

Choose Your Option

Rent for flexible short-term use or purchase to own

Rent
Purchase
Rental Rates
Daily
$55.00
Weekly
$125.00
Monthly
Contact for pricing
Reference rates only. You get the best rate calculation - actual price based on your selected rental dates.
See more product details
Need Help Choosing?
Our rental specialists can help you select the right equipment for your specific application.
Call 866-736-8347
1
Choose Purchase Option
Rent short-term or buy to own
Required
Rental Period What are these dates?

No rental period selected

Set your dates to see pricing.

Rental Period What are these dates?
—
Important: These dates apply to your entire cart. Changing dates will affect pricing for all rental items in your cart.

Need equipment sooner than the dates shown? We can often accommodate rush rentals. Call us at 866-736-8347 to confirm availability.

Used Equipment: This equipment has been previously used and tested. It may show signs of wear but is fully functional and inspected.

Your Configuration

LT300 by Extech - Light Meter
unit quantity
× $55.00
$55.00 Select dates
Subtotal:
$55.00
Select dates
Technician verified and tested instrumentation before every rental
Expert support available by phone and email
Fast delivery and flexible rental terms
What is the Extech LT300 used for?
It measures illumination levels in workplaces, offices, labs, and industrial environments for lighting adequacy assessments, OSHA lighting compliance support, and ergonomic evaluations. It reads in both Lux (40–200,000) and foot-candles (40–20,000 Fc).
LT300 vs. a UV meter — what's the difference?
The LT300 measures visible light illumination (Lux/Fc). UV meters measure ultraviolet radiation by wavelength band. Use the LT300 for lighting adequacy checks; use a UV meter for UV hazard assessment or UVGI validation.
What is the remote light sensor, and why does it matter?
The sensor is on a coiled cable separate from the meter body. This lets you position the sensor at the exact point of interest — a workstation surface, a reading plane, or a task area — without the meter body casting shadows or blocking the measurement.
How do I take repeatable illumination readings?
Use a consistent measurement height and orientation for each point, avoid casting shadows over the sensor, and confirm fixtures are in normal operating mode. Take multiple readings — illumination varies significantly with distance and angle from fixtures.
What's a common mistake in lighting surveys?
Taking one reading and calling it representative of a work area. Illumination levels vary across aisles, between workstations, and around obstructions. Use a defined grid or point list and document conditions (all lights on, time of day, blinds open/closed).
What's included in the rental kit?
The LT300 meter with protective rubber jacket, remote photo sensor with protective cap and coiled cable, 9V battery installed, carrying case, and user guide.
What does it cost to rent the Extech LT300?
$55/day and $125/week. For lighting surveys covering multiple areas, the weekly rate is typically more economical than day rates for any project that requires more than two days of measurement. The survey itself is quick — documentation and reporting time often extends the rental.

Exposure Hazards This Equipment Detects

Illuminance (lux / fc / µW/cm² / W/m²)

CAS: N/A
Learn More
Updated on March 09, 2026
PEL TWA
N/A
REL TWA
N/A
TLV TWA
N/A

Features & Capabilities

Calibration Certificate Available: ✓ Yes
Monitoring Scope: Area Monitoring

Equipment Specifications

Measurement Type: Illuminance (Lux/Foot-candle)
Measurement Range: 40.00 to 200,000 Lux; 40.00 to 20,000 Fc
Spectral Range: CIE V(λ) photopic response function (visible spectrum), f1 ≤ 6%
Resolution: 0.01 Fc/Lux
Accuracy: ±(5% of reading + 0.5% full scale)
Sampling Rate: 13.3 times/sec (bargraph), 1.3 times/sec (digital)
Peak Capture: 10 µs
Calibration Standard: Calibration certificate provided; recalibration recommended every 2 years due to low instrument value vs. high calibration cost - NIST calibration valid for 1 year only, call to confirm if NIST cal is required
Connectivity: Not available on this model
Display: 3-3/4 digit LCD with analog bargraph and backlight
Battery Life: Not specified for this model

Kit Contents

Extech LT300 light meter with protective rubber jacket, Photo sensor with protective cap and coiled cable, 9V battery installed, Carrying pouch or case, User guide (physical or on flash drive).

Manufacturer Resources

Documents

User manuals, safety guides, and technical documentation from the manufacturer:

Videos

No manufacturer videos are currently available for this product. Check back later or contact us for more information.

Ask a Question

Have a question about this product? Fill out the form below and our team will get back to you shortly.

Need Help Choosing the Right Equipment?

Our customer success specialists are here to help you select the perfect equipment for your project

Call 866-736-8347