SoundPro Type 2 No Octave Band by TSI Quest - Sound Level Meter
Training
Available
Available
Training
Training
Training
Training
Training
SoundPro Type 2 No Octave Band by TSI Quest - Sound Level Meter
The TSI Quest SoundPro DL is a Type 2 (IEC 61672 Class 2) datalogging sound level meter with two independent virtual sound level meters for simultaneous multi-standard noise measurements against OSHA, MSHA, and ISO standards. This configuration does not include octave band analysis, making it a straightforward option for occupational noise surveys and hearing conservation programs where broadband SPL, Leq, and TWA measurements are the primary requirement.
Choose Your Option
Rent for flexible short-term use or purchase to own
Rental Rates
Daily
$115.00
Weekly
$330.00
Monthly
Contact for pricing
Reference rates only. You get the best rate calculation - actual price based on your selected rental dates.
What is the TSI Quest SoundPro Type 2 No Octave used for?
The SoundPro Type 2 No Octave is a datalogging Type 2 (Class 2) sound level meter for OSHA 1910.95 occupational noise surveys and hearing conservation program compliance measurements where octave band frequency analysis is not required. It measures Leq, Lmax, Lpk, TWA, dose, and time-history sound levels.
When do I choose the SoundPro Type 2 No Octave vs. SoundPro Type 2 with octave bands?
The SoundPro Type 2 No Octave is the right choice when your scope is limited to OSHA compliance dosimetry and area noise surveys that don't require frequency-specific engineering data. If your project requires noise source identification, hearing protector NRR verification, or engineering noise control design, select the SoundPro Type 2 with 1/1 octave band analysis or the Type 1 with 1/3 octave.
Can the SoundPro Type 2 No Octave be used for both SLM and dosimeter-equivalent measurements?
The SoundPro is an area/handheld SLM — it measures ambient noise levels at a fixed location or handheld position. For personal dose measurements worn on a worker, a dedicated noise dosimeter (Edge 4 Plus, Edge 5, or dBadge2IS) is needed. Both types are available from RAECO Rents.
Is octave band data ever required by OSHA?
OSHA does not require octave band data for standard noise compliance surveys. Octave band analysis is required by ACGIH when applying frequency-weighted hearing protector attenuation (C5 octave band method) and is needed for engineering noise control design, audiometric evaluation support, and NIOSH noise control recommendations.
What software does the SoundPro Type 2 No Octave use?
TSI Detection Management Software (DMS) and Quest Suite software for data download, trend analysis, and OSHA-format report generation. Included with the rental.
What is the SoundPro Type 2 No Octave rental rate from RAECO Rents?
Contact RAECO Rents at 866-736-8347 for current pricing. Rental includes the SLM, Type 2 microphone, windscreen, calibrator, tripod adapter, DMS software, and case.
Exposure Hazards This Equipment Detects
Noise (dBA)
CAS:
N/A
Learn More
Updated on March 09, 2026
PEL TWA
90 dBA
REL TWA
85 dBA
TLV TWA
85 dBA
Features & Capabilities
| Calibration Certificate Available: | ✓ Yes |
| Datalogging: | ✓ Yes |
| Monitoring Scope: | Area Monitoring |
Equipment Specifications
| Type/Class Rating: | Type 2 (IEC 61672 Class 2) |
| Measurement Range: | 0 to 140 dB total measurement range; peak up to 143 dB |
| Frequency Weighting: | A, C, Z, F |
| Time Weighting: | Fast, Slow, IEC Impulse |
| Exchange Rate: | 3 dB, 4 dB, 5 dB, 6 dB |
| Octave Band Filters: | Not available on this model |
| Dynamic Range: | Over 120 dB |
| Audio Recording: | Not available on this model |
| Data Logging Interval: | 1 second to 60 minute intervals |
| Data Storage Capacity: | SD card, 32 MB to 32 GB capacity |
| Battery Run Time: | >10 hours continuous, 4 AA alkaline (SLM mode, no backlight/filters active); optional NiMH cells, similar runtime |
| Compliance Standards: | EN/IEC 61672, ANSI S1.4-1983, ANSI S1.43/1997, EC/IEC 61260, ANSI S1.11-2004, IEC 60651, IEC 60804 |
Kit Contents
Manufacturer Resources
Documents
User manuals, safety guides, and technical documentation from the manufacturer:
- TSI/Quest Soundpro User Manual PDF
- TSI/Quest Soundpro Specification Datasheet PDF
- TSI/Quest Soundpro Quick Start Guide PDF
- SoundPro Community Noise Survey Setup Guide PDF
- Detection Management Software DMS User Manual PDF
Videos
No manufacturer videos are currently available for this product. Check back later or contact us for more information.
Ask a Question
Have a question about this product? Fill out the form below and our team will get back to you shortly.
- Translation missing: en.general.accessibility.refresh_page
- Translation missing: en.general.accessibility.new_window
Rental Dates Notice