UltraRAE 3000+ by Honeywell RAE Systems - Portable Compound-Specific VOC Monitor

Intrinsically Safe Datalogging
Gas Monitor Manufacturer: Honeywell RAE Systems
UltraRAE 3000+ by Honeywell RAE Systems - Portable Compound-Specific VOC Monitor
Training
Available
UltraRAE 3000+ by Honeywell RAE Systems - Portable Compound-Specific VOC Monitor
UltraRAE 3000+ by Honeywell RAE Systems - Portable Compound-Specific VOC Monitor
Training
How to use Safety Suite Software for RAE Systems

Benzene separation tubes are required to measure benzene and are not automatically included. Select them under Required Modules, or supply your own.

The UltraRAE 3000+ by Honeywell RAE Systems is a portable compound-specific VOC monitor designed for benzene monitoring, industrial hygiene, marine spill response, and refinery downstream monitoring. It detects over 200 VOCs and provides benzene-specific measurements with a 60-second response for a snapshot reading and a 15-minute response for benzene STEL. A rechargeable lithium-ion battery provides up to 12 hours of continuous operation, and the instrument is compatible with Honeywell Safety Suite software for data management. Optional RAE-Sep benzene separation tubes enable selective benzene measurement in complex VOC environments and are available as an add-on.

Choose Your Option

Rent for flexible short-term use or purchase to own

Rent
Purchase
Rental Rates
Daily
$170.00
Weekly
$490.00
Monthly
Contact for pricing
Reference rates only. You get the best rate calculation - actual price based on your selected rental dates.
See more product details
Need Help Choosing?
Our rental specialists can help you select the right equipment for your specific application.
Call 866-736-8347
1
Choose Purchase Option
Rent short-term or buy to own
Required
Rental Period What are these dates?

No rental period selected

Set your dates to see pricing.

Rental Period What are these dates?
—
Important: These dates apply to your entire cart. Changing dates will affect pricing for all rental items in your cart.

Need equipment sooner than the dates shown? We can often accommodate rush rentals. Call us at 866-736-8347 to confirm availability.

Used Equipment: This equipment has been previously used and tested. It may show signs of wear but is fully functional and inspected.

Your Configuration

UltraRAE 3000+ by Honeywell RAE Systems - Portable Compound-Specific VOC Monitor
unit quantity
× $170.00
$170.00 Select dates
Subtotal:
$170.00
Select dates
Technician verified and tested instrumentation before every rental
Expert support available by phone and email
Fast delivery and flexible rental terms
What is the UltraRAE 3000+ used for?
The UltraRAE 3000+ is a portable compound-specific VOC monitor used when you need real-time readings for a target VOC rather than a general "total VOC" PID screening number. It's built for the friction point in VOC work: background VOCs can mask the compound you care about, and you need a more specific answer than a standard PID can provide.
What measurement range and resolution are listed for this instrument?
The product description lists a measurement range of 0 to 10,000 ppm with 0.1 ppm resolution.
UltraRAE 3000+ vs a standard PID — what’s the difference?
A standard PID reports a general VOC response and is best for screening and mapping. A compound-specific monitor is used when you need a specific compound result that is less affected by other VOCs. If the deliverable is "compound X concentration," start with the compound-specific category.
UltraRAE 3000+ vs ppbRAE 3000 — which should I choose?
Choose ppbRAE when you need very sensitive low-level total VOC screening and trend mapping. Choose UltraRAE when the decision depends on a specific compound answer rather than a total VOC signal.
UltraRAE 3000+ vs MiniRAE 3000 — which should I choose?
Choose MiniRAE for quick site surveys and hotspot mapping when total VOC screening is sufficient. Choose UltraRAE when you need compound-specific monitoring and better discrimination from background VOCs.
Is the UltraRAE 3000+ intrinsically safe?
Yes. The product record indicates intrinsically safe is enabled.
Does it support data logging?
Yes. The product record indicates datalogging is enabled.
How should I use it during an industrial hygiene or safety survey?
Use repeatable points and document conditions. Take baseline readings, then re-check after process changes or control changes. If you're tracking a compound-specific hazard, keep sampling technique consistent so trends are defensible.
What’s a common mistake when using VOC monitors for decisions?
Assuming any PID number is compound-specific. If you need a specific compound, use the instrument category designed for that requirement and document your method and conditions.
Why are readings different across the same room?
VOC distributions are driven by sources and airflow. Ventilation changes, temperature, and proximity to a release point create pockets. Use consistent sampling height and dwell time and document ventilation/process state for comparisons.

Exposure Hazards This Equipment Detects

Volatile Organic Compounds (VOCs)

CAS: N/A
Learn More
Updated on March 09, 2026
PEL TWA
N/A
REL TWA
N/A
TLV TWA
N/A

Benzene (C₆H₆)

CAS: 71-43-2
Learn More
Updated on March 09, 2026
PEL TWA
1 ppm
REL TWA
Ca 0.1 ppm
TLV TWA
0.02 ppm

Features & Capabilities

Calibration Certificate Available: ✓ Yes
Datalogging: ✓ Yes
Intrinsically Safe: ✓ Yes

Equipment Specifications

Detection Method / Sensor Type: Photoionization detector (PID); standard 9.8 eV lamp, optional 10.6 eV and 11.7 eV
Target Gas/Analyte: Volatile Organic Compounds (VOCs); compound-specific benzene and butadiene
Measurement Range: VOC mode: 0.01 to 10,000 ppm. Benzene-specific mode: 0 to 200 ppm
Response Time: T90 < 3 seconds for VOCs; < 60 seconds for benzene and butadiene
Resolution: 0.01 ppm (VOC and benzene-specific modes)
Sample Flow Rate: Internal integrated pump, 400 cc/min; draws samples from up to 100 ft (30 m)
Sampling Modes: Benzene-specific detection via 60-second snapshot or 15-minute STEL mode
Alarm Features: 95 dB buzzer and flashing LEDs for High, Low, STEL, TWA, low battery, and pump stall
Connectivity: USB or wireless download; BLE, RF modem, and mesh networking with up to 200 m line-of-sight range
Intrinsically Safe Rating: Class I, Division 1, Groups A, B, C, D; ATEX and IECEx approved
Data Storage Capacity: Up to 6 months at 1-minute intervals
Battery Run Time: Up to 16 hours continuous; rechargeable Li-ion and alkaline options included

Kit Contents

UltraRAE 3000 monitor, rechargeable lithium-ion battery & Alkaline Battery Pack, AC charger, Spare Particulate Filter, Flexible Inlet Probe, Screwdriver and Hex Key, user manual, hard-shell carrying case, calibration certificate

Manufacturer Resources

Documents

User manuals, safety guides, and technical documentation from the manufacturer:

Videos

No manufacturer videos are currently available for this product. Check back later or contact us for more information.

Ask a Question

Have a question about this product? Fill out the form below and our team will get back to you shortly.

Need Help Choosing the Right Equipment?

Our customer success specialists are here to help you select the perfect equipment for your project

Call 866-736-8347